TIP: in order to set up your audio you’ll first need to set up a live event. To find out how to set up an event click here.
This article will explain how to broadcast your Traktor mix with Mixlr. This article is for using the Traktor S4 controller with Mac.
Open Traktor Preferences
Open Traktor on your machine. You can open the Preferences window by clicking the circular icon in the top right of the app, highlighted below.
Traktor Audio Setup
Select the the Audio Setup tab in the column to the left. Ensure that the settings are as follows:
Traktor Output Routing
Select the Output Routing tab. Ensure the settings are as follows:
Routing the audio cables on the S4
Because Traktor is sending audio to Output, and Mixlr is trying to receive audio from the Input, you'll need to set up some additional routing via your S4 controller.
To ensure that the Traktor audio can be received in Mixlr, use phono to phono cables to route 'Main Out 1 and 2' to 'Input Channel C 1 and 2' on the S4.
Use the remaining outputs in 'Main Out' to connect your speakers.
Select Traktor S4 in the Mixlr app
Open the Mixlr desktop app.
Click 'Select Source' for the MIC or ANY INPUT channel and select 'Traktor Kontrol S4 > Channels 1 and 2'.
TIP: if you're having problems with the Mixlr app receiving audio signal, check that you have the latest Traktor drivers installed. You can download the latest drivers here.
Click 'Start' to broadcast your Traktor mix live on Mixlr!