All Collections
For creators
Setting up your audio
Broadcast using Traktor S2 (Windows)
Broadcast using Traktor S2 (Windows)

Use Mixlr to stream your live Traktor mix

Jon avatar
Written by Jon
Updated over a week ago

TIP: in order to set up your audio you’ll first need to set up a live event. To find out how to set up an event click here.

This article will explain how to broadcast your Traktor mix with Mixlr. This article is for using the Traktor S2 controller with Windows.

TIP: if you have a different Traktor controller or operating system try one of our other articles:
Traktor S4 with Windows
Traktor S2 with Mac
Traktor S4 with Mac

Open Traktor Preferences

Open Traktor on your machine. You can open the Preferences window by clicking the circular icon in the top right, highlighted below.

Traktor Audio Setup

Select the the Audio Setup tab in the column to the left. Ensure that the settings are as follows:

Traktor Output Routing

Select the Output Routing tab. Ensure the settings are as follows:

Select Traktor S2 in the Mixlr app

Open the Mixlr desktop app.

Click 'Select Source' for the MIC or ANY INPUT channel and select 'Speakers (Traktor Kontrol S2) (loopback) > Channels 1 and 2'.

TIP: if you're having problems with the Mixlr app receiving audio signal, check that you have the latest Traktor drivers installed. You can download the latest drivers here.

Click 'Start' to broadcast your Traktor mix live on Mixlr!

Did this answer your question?