Broadcast using Traktor S4

Step 1: Configure Traktor

1. Open Traktor and select the Preferences icon (circular icon, top right of the app).

2. Select the Audio Setup tab. Set your audio device to Traktor Kontrol S4 and set the sample rate to 44100 Hz.

3. Select the Output Routing tab and set the Output Monitor settings to Out: Monitor left and right respectively, and the Output Master to Out: Master left and right respectively.

Step 2: Route the audio cables

Because Traktor sends audio to the S4's outputs and Mixlr needs to receive it from the S4's inputs, you need to physically loop the audio back using phono cables.

1. Using phono to phono cables, connect Main Out 1 and 2 to Input Channel C 1 and 2 on the back of your S4.

2. Connect your speakers to the remaining Main Out outputs.

Step 3: Set up Mixlr

1. Open Mixlr Studio and in the channel area, select the + icon

2. Select the source selector at the top of the input channel.From the input list, select Traktor Kontrol S4 > Channels 1 and 2.

3. Check that you can see an audio signal coming in, then go live.

Troubleshooting